Home / Products / Precision Pipe / High Precision Steel Tube

Product Category

Share to:

High Precision Steel Tube

Material:
Carbon Steel, Alloy Steel, Stainless Steel

Availability:

Quantity:



Inquire Add to Basket

Product Description

STANDARDS

COLD DRAWN SEAMLESS STEEL TUBE
Standards		Steel Grades	Size Range
DIN	2391	ST35/45/52	OD2 - 60mm × WT0.3 -10mm
	1629	ST37/44/52	OD2 - 60mm × WT0.3 -10mm
	1630	ST37.4/44.4/52.4	OD2 - 60mm × WT0.3 -10mm
	2445	ST35/ST52/ST37.4//52.4	OD2 - 60mm × WT0.3 -10mm
	73000	ST 35 / 45 / 52/ 37.4 / 44.4 /52.4	OD3 - 30mm × ID 1 - 12.5 mm
GB/T	8162	10/20/16Mn/35/45/30CrMo/42CrMo/etc	OD2 - 60mm × WT0.3 -10mm
	8163	10/20/16Mn/35/45/30CrMo/42CrMo/etc	OD2 - 60mm × WT0.3 -10mm
	3639	10/20/16Mn/35/45/30CrMo/42CrMo/etc	OD2 - 60mm × WT0.3 -10mm
	3093	10/20/16Mn/35/45/30CrMo/42CrMo/etc	OD3 - 30mm × ID 1 - 12.5 mm
EN	10305-1	E215/235/255/355	OD2 - 60mm × WT0.3 -10mm
EN	10305-4	E215/235/255/355	OD2 - 60mm × WT0.3 -10mm
ASTM	A822-A450	A822	OD2 - 60mm × WT0.3 -10mm
	A179-A450	A179	OD2 - 60mm × WT0.3 -10mm
	A519	1010/1015/1025/1030/1045/4130/4140/etc	OD2 - 60mm × WT0.3 -10mm
SAE	J524	Low carbon steel	OD2 - 60mm × WT0.3 -10mm
SAE	J529	Low carbon steel	OD3 - 30mm × ID 1 - 12.5 mm
JIS	G3445	STKM11A/12A/12B/12C/13A/13B/13C/S45C/etc	OD2 - 60mm × WT0.3 -10mm
JIS	G3455	STS35/38/42/49	OD3 - 30mm × ID 1 - 12.5 mm
ISO	8535	ST 35 / 45 / 52/ 37.4 / 44.4 /52.4	OD3 - 30mm × ID 1 - 12.5 mm
NF	A49-310	TU37b/TU52b	OD2 - 60mm × WT0.3 -10mm
BS	3602	CFS 360	OD2 - 60mm × WT0.3 -10mm
BS	6323(-4)	CFS2/CFS3/CFS4/CFS5	OD2 - 60mm × WT0.3 -10mm
ASTM	A269	304,304L, 316, 316L	OD2 - 60mm × WT0.3 -10mm
EN	10216-5	1.4401, 1.4404	OD2 - 60mm × WT0.3 -10mm
Other carbon, alloy and stainless steel grades and sizes available upon customer's request
Delivery conditions: BK (+C) BKW (+LC) BKS (+SR) GBK (+A) NBK (+N) Major Inspection Items: Tensile stength, Yield stength, Elongation, Flattenging, Flaring, Chemical analysis Eddy Current Test 100%, Size and surface checking 100% Certificates: according to EN 10204 3.1

Description:

Seamless steel pipe has better pressure capacity, strength is higher than ERW welded steel pipe. So it is widely applied in high pressure equipment, and thermal, boiler industries. Generally the welding seam of the welded steel pipe is the weak point, the quality affect overall performance.

Manufacturing Process:

Billets and coils are delivered to the pipe mill ready to be made into carbon steel pipe. Depending on the capabilities of the pipe mill and the end use of the final product, the casts will be formed into pipe by means of four distinct different manufacturing.Seamless carbon steel pipe has, as its name implies, no longitudinal weld seam. It is, in essence, one solid homogeneous piece of steel. A solid billet is simply heated and then stretched over a series of mandrels until the pipe has achieved its desired diameter and wall thickness.

PRODUCT INFORMATION

precision steel tube

PACKING AND DELIVERY

tube packing

APPLICATION

Automotive and Machinery Applications:
A. Powertrain System:
B. Fluid Handling Systems:
C. Drive and Steering System:
D. Hydraulic Systems:
E. Other Applications:

Front axles
Wire tubes for sun-shading boards and headrest chairs

Hydraulic and pneumatic pressure lines
Hydraulic fittings and tubing

Ingrain gear pipes
Power steering feed pipes

Tube assemblies
Air conditioning tubing
Clutch actuator pipes

Fuel rails and lines
Common-rail diesel lines
Piston-cooling jets
Selective Catalytic Reduction (SCR) and Exhaust Gas Recirculation (EGR) components
Rigid pipes for oil and water cooling